Self Studies

Current Electri...

TIME LEFT -
  • Question 1
    4 / -1

    The resistance of a galvanometer coil is R. What is the shunt resistance required to convert it into an ammeter of range 4 times?

  • Question 2
    4 / -1

    If an ammeter is connected in parallel to a circuit, it is likely to be damaged due to excess

  • Question 3
    4 / -1

    In the given figure, battery E is balanced on 55 cm length of potentiometer wire but when a resistance of 10 Ω is connected in parallel with the battery then it balances on 50 cm length of the potentiometer wire then internal resistance r of the battery is

  • Question 4
    4 / -1

    In a potentiometer experiment the balancing with a cell is at length 240 cm. On shunting the cell with a resistance of 2 Ω, the balancing length becomes 120 cm. The internal resistance of the cell is

  • Question 5
    4 / -1

    The resistance of an ideal ammeter is

  • Question 6
    4 / -1

    A galvanometer has a resistance of 25 ohm and a maximum of 0.01 A current can be passed through it. In order to change it into an ammeter of range 10 A, the shunt resistance required is

  • Question 7
    4 / -1

    In the circuit shown, a meter bridge is in its balanced state. The meter bridge wire has a resistance 0.1 ohm/cm. The value of unknown resistance X and the current drawn from the battery of negligible resistance

  • Question 8
    4 / -1

    Voltmeters V1 and V2are connected in series across a D.C. line. V1 reads 80 volt and has a per volt resistance of 200 ohm. V2 has a total resistance of 32 kilo ohm. The line voltage is

  • Question 9
    4 / -1

    AB is a potentiometer wire of length 100 cm and its resistance is 10 ohm. It is connected in series with a resistance R = 40 ohm and a battery of e.m.f. 2 V and negligible internal resistance. If a source of unknown e.m.f. E is balanced by 40 cm length of the potentiometer wire, the value of E is

  • Question 10
    4 / -1

    An ammeter gives full deflection when a current of 2 amp. flows through it. The resistance of ammeter is 12 ohm. If the same ammeter is to be used for measuring a maximum current of 5 amp., then the ammeter must be connected with a resistance of

Submit Test
Self Studies
User
Question Analysis
  • Answered - 0

  • Unanswered - 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
Submit Test
Self Studies Get latest Exam Updates
& Study Material Alerts!
No, Thanks
Self Studies
Click on Allow to receive notifications
Allow Notification
Self Studies
Self Studies Self Studies
To enable notifications follow this 2 steps:
  • First Click on Secure Icon Self Studies
  • Second click on the toggle icon
Allow Notification
Get latest Exam Updates & FREE Study Material Alerts!
Self Studies ×
Open Now