Self Studies

Metals and Non-metals Test - 37

Result Self Studies

Metals and Non-metals Test - 37
  • Score

    -

    out of -
  • Rank

    -

    out of -
TIME Taken - -
Self Studies

SHARING IS CARING

If our Website helped you a little, then kindly spread our voice using Social Networks. Spread our word to your readers, friends, teachers, students & all those close ones who deserve to know what you know now.

Self Studies Self Studies
Weekly Quiz Competition
  • Question 1
    1 / -0
    An element has a dull appearance, low density, and low melting point. It could be a ________.
    Solution
    Non-metals are usually elements that have low density, a dull appearance, and a low melting point.
  • Question 2
    1 / -0
    Magnesium can be extracted from its ore by:
    Solution
    Magnesium metal is high up in the reactivity series, is very reactive, and cannot be obtained from its compounds by heating with carbon. This is because it has more affinity for oxygen than carbon. Thus, it is obtained by electrolytic reduction.
  • Question 3
    1 / -0
    The metals sodium, calcium, and magnesium at the top of the reactivity series can be obtained by:
    Solution
    The metals high up in the activity series are very reactive. They cannot be obtained by heating their compounds with carbon. Reduction of their oxides by carbon is not possible because these metals have a high affinity for oxygen than carbon. 
    Sodium, calcium, and magnesium metals are obtained by the electrolysis of their molten chlorides, e.g., extraction of $$Na$$ from $$NaCl$$.
    Option $$C$$ is correct.
  • Question 4
    1 / -0
    Conversion of ferric oxide to iron metal using aluminium is called as:
    Solution
    Ferric oxide, when heated with aluminium, it is reduced to iron metal. In this reaction, a lot of heat is produced. This reaction is also known as a thermite reaction. A thermite reaction is used in the welding electric conductors, iron joints, etc. such as joints in railway tracks. 
    $$ Fe_2O_3 + 2Al \rightarrow 2Fe + Al_2O_3 + \ heat $$
    Hence, option $$C$$ is correct.
  • Question 5
    1 / -0
    Which of the following reactions will occur, according to the activity series?
    1. $$Fe+Al_2O_3 \rightarrow$$ 
    2. $$Cu+MgCl_2 \rightarrow$$
    3. $$Cu +AlCl_3 \rightarrow$$
    4. $$Fe + HCl \rightarrow$$
    Solution
    The activity/reactivity series is a list of metals arranged in the order of their decreasing activities. Metals higher in the series displace the metals that come below them in the activity series. $$Fe$$ and $$Cu$$ cannot displace $$Al$$ or $$Mg$$ as they fall below the given metals in the reactivity series. However, since $$Fe$$ is above hydrogen in the series, it can displace $$H$$ from the reaction 4.

    $$Fe + 2 HCl \rightarrow FeCl_2 + H_2$$
  • Question 6
    1 / -0
    Which of the following methods is suitable for preventing an iron frying pan from rusting?
    Solution
    Applying paint and grease are not suitable solutions to prevent an iron frying pan from rusting as the paint can melt by flame and can be destroyed in repeated use.
    Applying a coating of zinc is a better option as it forms a coating of corrosion-resistant zinc which prevents corrosive substances from reaching the more delicate part of the metal.
  • Question 7
    1 / -0
    In the reaction between $$Al$$ and $$Fe_2O_3$$, what is the correct final reaction?
    Solution
    Al will displace iron from solution as it is more reactive than iron according to the reactivity series
    $$\displaystyle  2Al+Fe_2O_3 \rightarrow Al_2O_3+2Fe$$
  • Question 8
    1 / -0
    Which of the following is not a property of aluminium?
    Solution
    Aluminium is a metal and shows the properties of metals, i.e, malleability, ductility and conductivity of heat and electricity. It has, however, like most metals, has a high melting point.
  • Question 9
    1 / -0
    Non-metals are poor conductors of heat and tend to:
    Solution
    Non-metals are poor conductors of heat and electricity. They are non-lustrous, non-sonorous and are brittle and non-malleable.
  • Question 10
    1 / -0
    When $$Fe_2O_3$$ is heated with aluminium powder, the products obtained are _______ .
    Solution
    When $$Fe_2O_3$$ is heated with aluminium powder, the products obtained are $$Fe$$, $$Al_2O_3$$ and $$heat$$.
    $$\displaystyle Fe_2O_3 + 2Al \rightarrow 2 Fe +Al_2O_3 + $$ $$heat$$
Self Studies
User
Question Analysis
  • Correct -

  • Wrong -

  • Skipped -

My Perfomance
  • Score

    -

    out of -
  • Rank

    -

    out of -
Re-Attempt Weekly Quiz Competition
Self Studies Get latest Exam Updates
& Study Material Alerts!
No, Thanks
Self Studies
Click on Allow to receive notifications
Allow Notification
Self Studies
Self Studies Self Studies
To enable notifications follow this 2 steps:
  • First Click on Secure Icon Self Studies
  • Second click on the toggle icon
Allow Notification
Get latest Exam Updates & FREE Study Material Alerts!
Self Studies ×
Open Now