Self Studies

General Principles and Processes of Isolation of Elements Test - 22

Result Self Studies

General Principles and Processes of Isolation of Elements Test - 22
  • Score

    -

    out of -
  • Rank

    -

    out of -
TIME Taken - -
Self Studies

SHARING IS CARING

If our Website helped you a little, then kindly spread our voice using Social Networks. Spread our word to your readers, friends, teachers, students & all those close ones who deserve to know what you know now.

Self Studies Self Studies
Weekly Quiz Competition
  • Question 1
    1 / -0
    In which of the following minerals, aluminium is not present?
    Solution
    Cryolite is $$Na_3AlF_6$$.

    Mica is $$KAl_3Si_3O_{10}(OH)_2$$ 

    Feldspars is $$KAlSi_3O_8 - NaAlSi_3O_8 - CaAl_2Si_2O_8$$.

    Fluorspar is  $$CaF_2$$.

    $$Al$$ is not present in fluorspar.

    Hence option $$D$$ is correct.
  • Question 2
    1 / -0
    In the electrolytic reduction of alumina, the electrolyte is covered with coke powder because, it __________.
    Solution
    The electrolytic mixture is sprinkled with coke to prevent the anode's oxidation by the oxygen evolved
    Also, more material to the top of the anode is continuously added in the form of briquettes made from coke and pitch. The lost heat from the smelting operation is used to bake the briquettes into the carbon form required for reaction with alumina.
    Therefore, $$C$$ is correct
  • Question 3
    1 / -0
    The order of processes involved in the dressing of an ore are :
    (i) grinding and crushing           (ii) hand picking                (iii) pulverization
    Solution
    Dressing of ore can be carried out by first handpicking followed by crushing and grinding and then pulverization.

    Hence, the correct option is $$(D)$$
  • Question 4
    1 / -0
    Which one of the following ore is not concentrated by froth floatation process?
    Solution
    Generally, sulphide ores are concentrated by "Froth floatation" and apart from pyrolusite ($$MnO_2$$), all are sulphide ores. So, pyrolusite is not concentrated by froth floatation process.
  • Question 5
    1 / -0
    Which of the following statements is incorrect?
    Solution
     $$Calamine = ZnCO_3, Siderite=FeCO_3$$

     $$Argentite=Ag_2S$$ and $$Cuprite=Cu_2O$$

     $$Zinc blende =ZnS, Pyrites = FeS_2$$

     $$Malachite=CuCO_3(Cu(OH)_2), Azurite=2CuCO_3Cu(OH)_2$$

    Here Argentite is not an oxide.

    Option B is correct.
  • Question 6
    1 / -0
    Zone refining is a method to obtain:
    Solution
    Zone refining is based upon fractional crystallization as the impurity prefers to stay in the melt and on solidification only pure metals solidifies on the surface of melt.
    In this process solubility of the impurities in the metal in molten and solid states is different. 
    This process is known as ultra-purification because it results in impurity level decreasing to ppm level.
  • Question 7
    1 / -0
    Which of the following element is found in its native state?
    Solution
    Silver and Gold occur in native state (free state). 
     
    These elements have very low reactivity and are not attacked by oxygen or air, moisture, carbon dioxide or other non metals.
  • Question 8
    1 / -0
    Which type of ores are concentrated by froth flotation process?
    Solution
    The froth flotation method is used to separate and concentrate ores by altering their surfaces to a hydrophobic or hydrophilic condition.

    This method is based on the principle of the difference in the wetting properties of the ore and the gangue particles with the water and oil.

    Therefore, sulphide ores preferably wetted by the oil and the gangue with the water.
    Hence, option $$(B)$$ is correct.
  • Question 9
    1 / -0
    Which ore is concentrated by froth flotation method?
    Solution
    Generally sulphide ores are concentrated by "Froth floatation" and cinnabar(HgS) is a sulphide ore.
  • Question 10
    1 / -0
    The oil used in the froth flotation method for the purification of ore is:
    Solution
    In froth floatation method, pine oil is used for the purification of ore.  

    Pine oil is added in the froth flotation method to create froath or bubble so that metal can be purify easily because pine oil prevents the ore from gangue for furthur mixing.

    Option C is correct.
Self Studies
User
Question Analysis
  • Correct -

  • Wrong -

  • Skipped -

My Perfomance
  • Score

    -

    out of -
  • Rank

    -

    out of -
Re-Attempt Weekly Quiz Competition
Self Studies Get latest Exam Updates
& Study Material Alerts!
No, Thanks
Self Studies
Click on Allow to receive notifications
Allow Notification
Self Studies
Self Studies Self Studies
To enable notifications follow this 2 steps:
  • First Click on Secure Icon Self Studies
  • Second click on the toggle icon
Allow Notification
Get latest Exam Updates & FREE Study Material Alerts!
Self Studies ×
Open Now