Self Studies
Self Studies
Self Studies
Self Studies

Digital Electro...

TIME LEFT -
  • Question 1
    1 / -0

    The resolution of a DAC is 'R' bits and the maximum output of a DAC is V volts. The weight of the most significant bit is

  • Question 2
    1 / -0

    An n-bit DAC is desired to change in 1 mV increments while using a reference voltage of 5 V. The number of bits ‘n’ required for the DAC is _______.

  • Question 3
    1 / -0

    A 10-bit ADC with a full scale output voltage of 10.24 V is designed to have a ± LSB/2 accuracy. If the ADC is calibrated at 25°C and the operating temperature ranges from 0°C to 50°C. Then the maximum net temperature coefficient of the ADC should not exceed.

  • Question 4
    1 / -0

    For a 10 bit digital ramp ADC using 500 kHz clock, the maximum conversion time is – (in μsec)

  • Question 5
    1 / -0

    A signal channel signal acquisition system with 0-10 V range consist of a sample and hold circuit with worst case drop rate of 100 μV/ms and 10 bit ADC. The maximum conversion time for the ADC is

Submit Test
Self Studies
User
Question Analysis

  • Answered - 0

  • Unanswered - 5

  • 1
  • 2
  • 3
  • 4
  • 5
Submit Test
Self Studies Get latest Exam Updates
& Study Material Alerts!
No, Thanks
Self Studies
Click on Allow to receive notifications
Allow Notification
Self Studies
Self Studies Self Studies
To enable notifications follow this 2 steps:
  • First Click on Secure Icon Self Studies
  • Second click on the toggle icon
Allow Notification
Get latest Exam Updates & FREE Study Material Alerts!
Self Studies ×
Open Now